Cimiva Happymodel Moblite7 75mm 1S Whoop FPV Racing Drone BNF With Flight Controller For Frsky BNF version 2

Features:1. The lightest 1s 75mm brushless whoop, powerful and efficiency.2. VTX power switchable 25mw~200mw.3. The lightest 1s AIO 5IN1 F4 flight controller. Low profile canopy design.4. The new EX0802 motor adopts an integrated outer rotor design, which is compact in structure and more durable.5. The newly designed highly integrated Diamond F4 flight controller, integrated OSD, Dshoot ESC, 2.4G SPI receiver (support external reception), galvanometer, 5.8G VTX (25-200mw switchable), etc.Description:Moblite7 is an ultra-light 1s 75mm wheelbase indoor Whoop traversing machine, and with 1s 650mah lithium battery, it can last up to 8 minutes.Specifications:Brand: HappymodelItem Name: Moblite7 1S 75mm ultra light brushless whoopWheelbase: 75mmSize: 97mm*97mm*25mmWeight: 19.5g (without battery)Weight: 36g(with Original 1s 650mah Lipo battery)Motor:Mode: EX0802 19000KVConfigu-ration:9N12PStator Diamter: 8mmStator Length: 2mmShaft Diameter:Φ1mmMotor Dimension(Dia.*Len):Φ10.5mm*14.9mmWeight(g): 1.7gNo.of Cells(Lipo):1S onlyFlight controller:(SPI RX version 1) DiamondF4 FS FC Firmware target: CrazybeeF4FS(SPI RX version 2) DiamondF4 FR FC Firmware target: CrazybeeF4FRMCU: STM32F411CEU6 (100MHZ, 512K FLASH)Sensor: MPU-6000(SPI connection)Original whoop size compatiblePower supply: 1S battery input (DC 2.9V-4.35V)Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 readyBuilt-in Betaflight OSD(SPI Control)Built-in 5.8G VTXBuilt-in SPI receiverBuilt-in 5V 1A BECOnboard 4in1 ESC:MCU upgraded to EFM8BB21Power supply: 1S LiPo/LiPo HVCurrent: 5A continuous peak 6A (3 seconds)Support BLHeliSuite programmableFactory firmware: O_H_50_REV16_8.HEXDefault protocol: DSHOT600Onboard SPI D8 receiver Version 2:SPI BUS receiver Frsky D8 compatibleCompatible Non EU transmitter D8 modelChannels: 8chFailsafe supportNo ground interference (Transmitter and receiver 1 m from the ground): 200m~300mOnboard SPI receiver Version 1:SPI BUS receiverProtocol: AFHDS and AFHDS-2A SwitchableChannels: 8ch(AFHDS) or 14ch(AFHDS-2A)No ground interference (Transmitter and receiver 1 m from the ground): 200~300mFailsafe supportOnboard 5.8g VTX:Output power: 25mw~200mw switchableFrequency: 40CHInput voltage: 3.3V 5.5VCurrent consumption: 300mA(type)Frequency: 5.8GHz 5bands 40 channels(include Race band)Smartaudio readyRuncam Nano4 Lite:Model: RunCam Nano4 LiteImage Sensor: 1/3" CMOSHorizontal Resolution: 800TVLLens: 2.1mm(M8) FOV 160°Signal System: PAL/NTSC Non SwitchableS/N Ratio: >50dBElectronic Shutter Speed: AutoAuto Gain Control (AGC): AutoMin. Illumination: 0.01Lux@1.2FD-WDR: AutoDay/Night: ColorPower: DC 3-5.5VCurrent: 170mA@5V 180mA@3.3VHousing Material: ABSNet Weight: 1.0gDimensions: L14mm*W12mm*H9mmLipo Battery:Capacity:650mAhVoltage:3.8vContinuous Discharge Rate: 30CInstantaneous discharge rate: 60CSize: 60mmx18mmx8mmWeight: 16gConnector: PH2.0Package Included:1* 75mm Frame1* DiamondF4 FR built-in SPI receiver 4* EX0802 KV19000 Unibell brushless motor1* HQPROP 40MMX2 propeller(4cw+4ccw)1* Runcam Nano4 Lite1* Built-in 5.8G 40ch 25mw-200mw VTX2* 1s 650mah Lipo battery1* Propeller disassemble tool<

Description:Moblite7 is an ultra-light 1s 75mm wheelbase indoor Whoop traversing machine, and with 1s 650mah lithium battery, it can last up to 8 minutes.Specifications:Brand: HappymodelItem Name: Moblite7 1S 75mm ultra light brushless whoopWheelbase: 75mmSize: 97mm*97mm*25mmWeight: 19.5g (without battery)Weight: 36g(with Original 1s 650mah Lipo battery)Motor:Mode: EX0802 19000KVConfigu-ration:9N12PStator Diamter: 8mmStator Length: 2mmShaft Diameter:Φ1mmMotor Dimension(ia.*Len):Φ10.5mm*14.9mmWeight(g): 1.7gNo.of Cells(Lipo):1S onlyFlight controller:(SPI RX version 1) DiamondF4 FS FC Firmware target: CrazybeeF4FS(SPI RX version 2) DiamondF4 FR FC Firmware target: CrazybeeF4FRMCU: STM32F411CEU6 (100MHZ, 512K FLASH)Sensor: MPU-6000(SPI connection)Original whoop size compatiblePower supply: 1S battery input (DC 2.9V-4.35VBuilt-in 5A(each) Blheli_S 4in1 ESC Dshot600 readyBuilt-in Betaflight OSD(SPI Control)Built-in 5.8G VTXBuilt-in SPI receiverBuilt-in 5V 1A BECOnboard 4in1 ESC:MCU upgraded to EFM8BB21Power supply: 1S LiPo/LiPo HVCurrent: 5A continuous peak 6A (3 seconds)Support BLHeliSuite programmableFactory firmware: O_H_50_REV16_8.HEXDefault protool: DSHOT600Onboard SPI D8 receiver Version 2:SPI BUS receiver Frsky D8 compatibleCompatible Non EU transmitter D8 modelChannels: 8chFailsafe supportNo ground interference (Transmitter and receiver 1 m from the ground): 200m~300mOnboard SPI receiver Version 1:SPI BUS receiverProtocol: AFHDS and AFHDS-2A SwitchableChannels: 8ch(AFHDS) or