Eastwood 100lb Pressure Abrasive Blaster

Bigger is better! Eastwood's "High-Flow" Pressure abrasive blaster features high-volume, extra-large valves, which means more air volume and more abrasive flow for faster removal of rust and paint. Built for the professional, with a sturdy welded hopper, 1/2" heavy-duty nozzle, heavy-wall blast hose and safety pressure-relief valve, so it's rugged, durable, and very efficient. Don't skimp with one of those low-cost units that frustrate you with clogging and sporadic media spraying. This Eastwood pressure blasting machine completely strips the average frame in less than a day, rather than weeks using other units or methods. Designed for high flow with minimal air input; a compressor producing a minimum of 10cfm at 90psi will work fine. 18.5"H x 12"W. Rolls easily to your job site. For best results and the most efficient operation, use clean, dry, 80-grit or finer abrasive media. Use of Walnut shell media is not recommended. 1-year limited warranty. Specifications Tank Volume: 10 gallons / 100 pounds Hose Length: 8ft.x1/2"i.d. Working Pressure: 60-125psi Air Consumption: 6-25cfm Overall Dimensions: 11" x 17" x 34" Weight: 41 lbs. Contents (1) 100-lb.-capacity Blaster (30-60 minutes of blasting) (1) Blast Hood (1) Moisture Separator (1) 1/2"-ID x 8'-long Hose (4) Ceramic Nozzles (2.0, 2.5, 3.0 and 5mm)

100-lb. media capacity Large 1/2"-I.D. blaster hose and fittings 8'-long, heavy-wall blast hose with dead-man valve Requires just 10cfm at 90psi All-steel welded top-loading hopper and pressure gauge