Features and Benefits: LOADpro® Test Leads load the circuit to see if current can flow LOADpro® identifies these problems fast: High corrosive resistance, Shorts to ground and Open circuits By loading the circuit, LOADpro® makes a voltage drop test “on the fly”, just press the switch – the test results can not lie! Use LOADpro® with your Digital Multimeter and follow our test method - you will find wiring faults quicker SteadyPin Probe Tips LOADpro® performs voltage drop test with the push of a button. On a 12 Volt system, pressing the switch applies a load of approximately .5 Amps across the circuit. This simple test finds problems in corroded wires/connections and shorts to ground. Works with your existing Digital Multimeter. Instead of a pointed probe, SteadyPin tips have a small recess at the tip that allows the probe to sit firmly on a male ECM or connector pin. Traditional pointed probes fail to give an effective connection and creates difficulties in completing manufacturer specific voltmeter tests.

Dynamic testing lead kit allows you to troubleshoot problems with open circuits, including high resistance or shorts Loads the circuit for a fast, "on-the-fly" voltage drop test; Just press the switch and receive your test results SteadyPin tips have a small recess at the tip, firmly resting on a male ECM or connector pin for a more effective connection Finds wiring faults quicker, attaching to your DMM voltmeter to quickly diagnose problems and check for issues Replaces your existing leads with a high-quality set that offers fast and effortless testing Color: Red Dimensions (L x W x H): 9 x 1.75 x 1.25 inches Weight: 1 pound Manufacturer warranty: 1-year warranty