☆ Feelworld FW709 is a portable IPS screen on-camera field HD monitor. This HD Monitor adopted advanced integrated circuits, high-quality new HD LED panel, which makes it low power consumption, stable performance, low radiation etc. This HD monitor is with casing compact, simple operation, and . It is with input，YPbPr input, Video and Audio input, Video output, output, 3.5mm Audio and built-in Speaker output which make it ideal to use with any DSLR cameras and video cameras. It is the best partner for photography. Features: FW709 7" IPS Screen On-Camera Field HD Monitor, with advanced parameters, lightweight and portable, can support multiple signal input, higher cost performance. Adopts IPS screen, resolution: 1024×600 pixels, max. 178°wide viewing angle, 800:1 contrast ratio, with higher color revivification degree, 600cd/㎡ brightness, adjustable color temperature. Peaking Focus Assist(Red highlight over parts of the monochrome image in focus)--The Peaking Filter is used to aid the camera operator in obtaining the sharpest possible picture, which is most effective when the subject is properly exposed and contains enough contrast to be processed. Camera 5D II Mode--With the special 5D feature turned on, The display should go to full screen utilizing the entire 7" screen minus grey bars, and no video black out or delay when staring and stopping video recording. Check Field:(Red,Green,Blue,Mono) Under the Blue Only Mode, only the blue pixels are used to generate the image, because hue and saturation can be adjusted quicker and more accurately. Pixel-to-Pixel--1:1 Pixel Mapping is enables filmmaker to see the input source images natively 1:1 without scaling it. such that each pixel received is mapped to a single native pixel on the monitor. This will in a black border around the image (windowboxing) unless the input resolution is greater than or equal to the monitor¡¯s native resolution. This technique is helpful if it is desired to stop a video from being stretched or distorted by the monitor. Image Freeze: You can zoom in the video to see the edge lines more clearly. It is the real-time zoom-in which is available when previewing, recording or playing back. Centre Marker: To set centre mark(cross mark) dispaly. Screen Marker(80%,85%,90%,93%,96%,2.35:1) Image Flip(U/D,L/R):The U/D,L/R of the image around flip. Full compatible with RED cameras. Compatible for Sony FS7 A7RII A7SII A7R A7S, for GH4, for Canon 5D mark III 7D D800 C100 C300, for BMPCC, etc. Built-in S-F970 battery plate at the back for fixing various batteries, such as for Sony F970, for Canon E6, for D28S & Anton, for Sony V-mount. Specifications: Brand: FEELWORLD Model: FW709 Panel: 7 inch IPS LCD screen Resolution: 1024 * 600 pixels Dot : 0.05(H) * 0.15(V)mm Aspect Ratio: 16:9 Brightness: 600cd/㎡ Contrast: 800:1 Viewing Angle: 89°/89°(L/R) 89°/89°(U/D) Backlight: LED Input Signal: , YPbPr, VIDEO, AUDIO Output Signal: VIDEO, , 3.5mm Audio, Built-in Speaker Support Format:     480i / 576i / 480p/576p     720p(60/59.94/50/30/29/25/24/23.98)     1080i(60/59.94/50)     1080p(60/59.94/5030/29.97/25/24/24fps/23.98/23.98fps) Color Video Format: PAL-4.43; NTSC-3.58 Input Voltage: DC7~18V Power Consumption: ≤6W Working Temperature: -20℃~55℃ Storage Temperature: -30℃~65℃ Install Way: 1/4"-20 Thread Socket(All 4 sides) Monitor Size: 18.5 * 13 * 2.8cm / 7.3 * 5.1 * 1.1in Monitor Weight: 451g / 15.9oz Package Size: 26 *8.5 * 24.5cm / 10.2 * 3.3 * 9.6in Package Weight: 1007g / 35.5oz

FW709 7" IPS Screen On-Camera Field HD Monitor, with advanced parameters, lightweight and portable, can support multiple signal input, higher cost performance.Adopts IPS screen, resolution: 1024×600 pixels, max. 178°wide viewing angle, 800:1 contrast ratio, with higher color revivification degree, 600cd/㎡ brightness, adjustable color temperature.Peaking Focus Assist(Red highlight over parts of the monochrome image in focus)--The Peaking Filter is used to aid t