Alto Music - Why you need the MIDI Solutions Pedal Controller Event Processor • This unit turns a guitar pedal into a midi controller • Creates midi data down to a single value • Accepts an effect pedal or any potentiometer with a 1/4” connection • Made in Canada Get ready to open up your midi control possibilities! With the MIDI Solutions Pedal Controller, you can use your favorite effect pedal to send continuous midi data simply by twisting the knobs. The Pedal Controller may be inserted inline at any point in the MIDI data stream, allowing you to send continuous controller information to any device in your MIDI setup. You can program the device to control aftertouch, pitch bend, control change, or even System Exclusive messages with a single variable byte (to control specific synth parameters).The MIDI channel is programmable as are the minimum and maximum values transmitted.The MIDI Solutions Pedal Controller accurately tracks the position of the pedal or potentiometer connected to it. If the pedal is moved very slightly, the Pedal Controller will send an update even if its position has only changed by a single value. Many cheaper control wheels or knobs only update themselves every 2 or every 4 values, resulting in zipper noise.Another unique feature of the Pedal Controller is its ability to add a variable amount of curvature to the response of the effect pedal. This allows you to correct for pedals with nonlinear responses, or to add greater response at one end of the pedal compared to the other.The Pedal Controller is programmed by sending it MIDI System Exclusive messages. Once programmed, its settings are retained even after power is removed.The Pedal Controller is MIDI-powered and requires no batteries or power supply to operate. A MIDI indicator LED lights up when the unit is powered and flashes when MIDI data passes through it..

midi solutions continuous midi data pedal controller