Milwaukee Instruments pH600-Box Pocket pH Tester

Product Details DIGITAL. SIMPLE. COMPACT. Fast, accurate results with digital LCD readout Easy measurement: just place the probe in the sample, gently stir and wait for the reading to stabilize Simple one-point calibration with an easy-to-use trimmer located on the back of the pH tester to protect from accidental splashes Cap to protect the pH sensor and keep it wet when stored upright Low power demand for extended battery life (batteries included) USE AND CARE All pH sensors have a limited life and response time gets longer with age. Properly maintaining your pH pen tester will give you fast, accurate results for longer. Here are Milwaukee's top four tips. 1. Always store upright with the cap full of buffer or storage solution MA9015 not water. 2. Clean your pH Pen Tester regularly by soaking in cleaning solution MA9016. 3. Calibrate after cleaning and/or storage before testing to adjust for changes in the pH sensor. 4. Gently stir the Pen in the sample for a faster result.

The Milwaukee pH600-AQ Ph Tester is supplied complete with protective cap calibration screw-driver batteries and instructions. Environment: 0 to 50 degree C; max RH 95 percent 3 x 1.5V Alkaline battery; 700 hours of use measures 150mm length by 30mm width by 24mm height. Needs to be stored correctly to ensure long lifetime. Do not be alarmed if white crystals appear around the cap. This is normal with pH electrodes and they dissolve when rinsed with water. Hi. It was in a storage solution when I received it and I used the the pH solution packs that came with it to calibrate. We recommend that you consider also buying our PH-MAIN kit is set of storage and cleaning solutions designed to extend the life of your pH or ORP electrode. Keeping your sensor clean during calibration and measurement ensures accurate and repeatable readings. The pH sensor needs to be hydrated for the ion exchange process to occur