Oukaning 52cc 2 Cycle Pile Driver T-Post Planter Fence Post Jack Hammer Driver Gas-Power

Application This petrol post driver is suitable for professional or daily household users to use in a series of pile-driving projects such as fences, star stakes, stakes, geophysical exploration, buildings, guardrails, brackets, photovoltaic power stations, forestry seedlings, vineyard brackets, vegetable planting, orchard brackets, fence protection, etc. Specifications Material: ABS, Iron, Aluminum, Alloy Steel, HDR Surface Treatment: Spray-paint, Blackening Color: Black, Red, Grey Power Source: ‎Gas Powered Starter System: Hand Pull Start Engine Type: Two-stroke, Air Cooling, Single-cylinder Number of Items: 1 Power: 1900W Noise: ≤103DBA Displacement: 52cc Max. Torque: 3.5N.m Gasoline Type: #92 Impact Energy: 25-45J Fuel Tank Capacity: 1L/0.26gal Impact Frequency: 800-2800BPM Fuel Consumption Rate: ≤0.5L/h Maximum Rotational Speed: 6500RPM Fuel Type: Mixed Oil (25 Gasoline: 1 2-stroke Engine Oil) Gross Weight: 22.7kg/50lbs Net Weight: 20.95kg/46.18lbs Equipped Socket Size: 55mm/2.17in(Small), 70mm/2.76in(Big) Product Size: 80*35*25cm/31.5*13.78*9.84in Package Size: 73*44*35cm/28.74*17.32*13.78in Package Included 1*Petrol Post Driver 2*Post Driving Heads 1*Oil-mixing Kettle 1*Tools Kit 1*Funnel 1*Filter Nozzle 1*English Manual All Accessories for Assembly Notes 1. Please read the manual carefully and strictly follow the precautions for a better experience. 2. If this product does not hammer, please check if too much lubricating oil has been added. Clean the excess oil in the cylinder and add about 20 grams of high-temperature resistant lubricating oil again. 3. If the impact frequency is too high to hold by hand, it is recommended to slightly reduce the speed of the carburetor. Otherwise, please increase the impact frequency. 4. If the machine is not easy to start, first check the ratio of oil: gasoline: oil=25:1 (please note to use 2-stroke oil), then pull out the rope for arm's length and continue pulling it two or three times to start. When the machine starts cold, please close the baffle and wait for the machine to function properly before opening it. 5. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.

Smooth Operation: Four high-quality shock absorption springs on both sides and advanced cooling vents ensure the stable operation of the machine with minimal impact and lower temperature. A two-stroke engine is not prone to cylinder pulling or stalling even after prolonged operation, allowing you to use it with confidence. Large Semi-transparent Fuel Tank: A 0.26gal large capacity and semi-transparent fuel tank allows you to monitor fuel usage at any time, replenishes fuel promptly and makes your work more efficient. Quick&Firm Replacement: The socket with high hardness and thread design can be quickly replaced according to the size of the pile, and the deep thread can ensure firm fixation. 2 Post Driving-head: The 2 post-driving heads (2.17in, 2.76in) make this an ideal choice for T-Posts, Y-Posts, and ground rods. Throttle Adjustment Switch: You can freely control the throttle and easily adapt to various working environments.