Peavey VSX 26e DSP-based Loudspeaker Management System

The VSXe processors are DSP-based, loudspeaker management systems that boast a 96kHz sample rate and a floating point DSP processor for quiet accurate filter response. The crossover filters are fully adjustable and any input can be routed to any output. Balanced Inputs: VSX 26e 2 EQ filter types include: PEQ, Low-Shelf, Hi-Shelf, Low-Pass, High-Pass, All-Pass1 and All-Pass2 Crossover/Band-pass filters feature Butterworth, Bessel or Linkwitz-Riley alignments from 1st order (6 dB/Oct) to 8th order (48 dB/Oct) Signal generator (sine, white noise, pink noise) Channels can be linked for simplified stereo operation Every output features: 9 bands of PEQ, gain, compressor/limiter, polarity, Delay (680 mS), mute, and crossover/band-pass filters 5 segment LED meters with limit indication on each output 2 XLR balanced inputs and 6 XLR balanced outputs Maximum input and output level +20 dBu, XLR balanced inputs and outputs Frequency response 20 Hz to 20 kHz +0, -1 dB THD+N < 0.01% at 1 kHz Every input features Gain, Mute, HP and LP filters, 8 bands of PEQ, polarity and Delay (680 mS) Security lock Dynamic range input to output greater than 109 dB (A-weighted) or 107 dB (unweighted) USB B port for setup and control 24 bit Delta-Sigma A/D and D/A converters Ethernet port for setup and control 96 kHz Sample rate PC Editor Programs allow complete remote setup and operation via USB or Ethernet Balanced Outputs: VSX 26e 6 5 segment LED meters on each input

Balanced Inputs: VSX 26e 2,EQ filter types include: PEQ, Low-Shelf, Hi-Shelf, Low-Pass, High-Pass, All-Pass1 and All-Pass2,Crossover/Band-pass filters feature Butterworth, Bessel or Linkwitz-Riley alignments from 1st order (6 dB/Oct) to 8th order (48 dB/Oct),Signal generator (sine, white noise, pink noise),Channels can be linked for simplified stereo operation