Professional Headlight Restoration Spray Kit, UV Cure coating, SMR-700/705

Professional Headlight Restoration Spray Kit, UV Cure coating, SMR-700/705

SMR-700, uv cure headlight coating is for professional use. Restore automotive headlights with a real uv cure coating, not a wax which will come off a month later.This sale is for an 8 ounce can of SMR-700, UV cure headlight coating, and a 19 ounce aerosol can of SMR-705, sanding/cleaning solution.Directions: Use product at 65+ degrees F and warm headlights (turn them on) before use.1. Clean headlight with SMR-705.2. Mask around headlight.3. Sand headlight with 400 grit paper until all oxidation and old coating is removed. You may use SMR-705 while sanding.4. Clean with SMR-705 and check if old coating and oxidation is gone, repeat #3 if needed.5. Final sand with 800 grit paper to remove all the 400 grit sand scratches.6. Clean with SMR-705 and dry with lint free rag.7. Apply SMR-700 with a 1.0 - 1.3 mm tip spray gun using very light cross mist coats until headlight is uniformly glossy (No Dry Areas).8. Allow 2 minutes of flash time before curing with direct sunlight or a UVA lamp.9. Sunlight at 70+ degrees F takes about 15 minutes to cure the coating.