Renogy 100W Watts 12V Monocrystalline Solar Panel Off Grid Kit for RV Boat

Renogy 100W Monocrystalline Starter Kit is designed specifically for customers new to solar. The Starter Kit is great for off-grid applications, such as RVs, trailers, boats, sheds, and cabins - providing many benefits, including, but not limited to, quiet power production and grid independence. This solar kit comes with the tools necessary for a new system: a Renogy 100W 12V Monocrystalline Solar Panel, a 30A PWM Charge Controller, a 20ft 12AWG MC4 Adaptor Kit, an 8ft 12AWG Tray Cable, and a set of Z-brackets. Start your solar adventure with a Renogy Starter Kit. Please Note: This is a Positive Ground Charge Controller. If grounding is necessary, it must be completed on the positive line. If the controller is to be used on a vehicle which has battery negative on the chassis, loads connected to the controller must not have an electrical connection to the vehicle body. If you want to connect this solar system to a negative ground battery bank, you can choose Regular Starter Kit, RV

Renogy 100W 12V Monocrystalline Solar Panel Output Cables: 4.0 mm2 (0.006 in2), 800mm (31.5 in) Connectors: MC4 Connectors Maximum Power: 100W Maximum System Voltage: 600V DC (UL) Optimum Operating Voltage (Vmp): 18.9V Open-Circuit Voltage (Voc): 22.5V Optimum Operating Current (Imp): 5.29A Short-Circuit Current (Isc): 5.75A Dimensions: 47 X 21.3 X 1.4 In Weight: 16.5lbs Renogy 30A PWM Solar Charge Controller Nominal System Voltage: 12V/24V Auto recognition Temp. Compensation: -30mV/°C (12V), -60mV/°C (24V) Rated Charge Current: 30A Max. Solar Input Voltage: 42V Rated Load Current: 30A Self-consumption: < 6mA Operating Temperature: -35°C to + 55°C Max. PV Input Power: 400W (12V), 800W (24V) Terminals: 10AWG 25% Current Overload: 1 Minute Dimensions: 5.55 x 3.90 x 1.37 In Weight: 7.2 oz. Notice: For safety, do not exceed 80% of charge controller current rating. This rating should be based on total short-circuit current of the solar panels. Renogy 20ft 12AWG Adaptor Kit - Connecting Solar Panels to Charge Controllers Length: 20ft AWG: 12 Rating Voltage: 600/1000V Temperature: -40°F to +185°F Normal Cross Sectional Area of the Conductor (mm2): 4.0 Diameter of Wires in Conductor (mm): 3.02±0.08 Min. Wall Thickness of Insulation (mm): 0.78 Min. Wall Thickness of Sheath (mm): 0.97 Number of Wires in Conductor: 56 IP 65 Protection