SUNLU PETG 3D Printer Filament 1.75mm,Dimensional Accuracy +/- 0.02 mm,1 kg/Spool,Black Color

SUNLU PETG filament has good load capacity and high tensile strength, impact resistance and is more durable than PLA. It also has no odour which allows easy printing indoors. It’s a kind of new light plastic. It is suitable for fast printing and printing large-sized models, printed products have flat and smooth surfaces.

Brand SUNLU Material Polyethylene Terephthalate Glycol Color 1kg Black Item Weight 2.2 Pounds Item Diameter 1.75 Millimeters --- About this item 【Toughness Enhanced PETG Filaments】 ---SUNLU premium PETG filaments have the advantages of incredible ease of printing Optimized printing quality, high purity with low shrinkage and superb layer bonding, meeting your demands for printing projects of functional parts with higher toughness. 【Dimensional Accuracy & Consistency】---These tough PETG filaments to be strict tolerances. Diameter 1.75mm, dimensional accuracy + / - 0.02 mm without any exaggeration; 1 kg spool (2.2lbs) 【Clog-Free, Bubble-Free & Easy-to-use】---Complete drying for 24 hours before packaging and vacuum sealed with desiccants in nylon re bag. without stringing and warping issues under optimal settings. Recommended PETG Filament Extrusion/Nozzle Temperature 240±10°C (446℉ - 482℉), heated Bed Temp: 70°C - 80°C (158℉ - 176℉). 【Wide Compatibility】---Works and harmonizes perfectly with all common 1.75mm FDM 3D printers, thanks to the high quality standards in terms of manufacturing accuracy and the small tolerance in diameter of +/- 0.02mm. 【Risk-Free】---One-month free trial, 30 day Money-back if you’re not satisfied. Spool Diameter: 8" - Spool Width: 2.5" - Spool Hub Hole Diameter: 2.20" --- SUNLU PETG filament has good load capacity and high tensile strength, impact resistance and is more durable than PLA. It also has no odour which allows easy printing indoors. It’s a kind of new light plastic. It is suitable for fast printing and printing large-sized models, printed products have flat and smooth surfaces. --- FAQ Why can't the filaments stick to the hotbed easy? 1). Check the temperature setting before printing, PETG filament temperature about 215-245°C; 2). Check if the plate surface has been used for a long time, it is recommended to apply PVA glue; 3). If the first layer has poor adhesion, it is recommended to re-level the print substrate to reduce the distance between the nozzle and the surface plate; --- Tips: 1).Please make 3D printer filament is to be stored in a sealed bag or box after each print to prevent moisture. 2).Be sure to insert the free end of the PETG filament into the holes to avoid being tangled for next time use. 3). If there is no print plan within a few days, retract the filament to protect the printer nozzle.