SUNLU PLA+ 3D Printer Filament 1.75mm,Dimensional Accuracy +/- 0.02 mm,1 kg/Spool,1.75mm PLA Plus,Blue

SUNLU is a high-tech enterprise specializing in R&D, production and sales of 3D printing filament, 3D Pen, 3D printer and 3D resin. The core team has many years of 3D printing technology experience and R&D capabilities.

Brand SUNLU Material Polylactic Acid Color 1kg Blue Item Weight 2.2 Pounds Item Diameter 1.75 Millimeters --- About this item ①【PLA+ Advantages】→ PLA+ filament is stronger than PLA, the color is brighter, it has many advantages, Clog/Bubble/Tangle/Warping/Stringing free, easy to Use, better layer adhesion. ②【Spool Diameter】→ Spool Diameter: 8.00", Spool Width: 2.50", Spool Hub Hole Diameter: 2.20". The size of the SUNLU filament spool is suitable for hanging on many 3D printers. ③【1.75mm Diameter】→ Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers. ④【Recommend Settings】→ We recommend printing at a Nozzle/Extrusion temperature of 210°C - 235°C (410°F - 455°F) and Bed/Platform temperature of 70°C - 80°C (158°F - 176°F). ⑤【Professional Team】→ SUNLU is a high-tech enterprise specializing in R&D, production and sales of 3D printing filament, 3D printer, 3D pen and 3D resin. SUNLU has a professional team. --- Q: Why can't the filaments stick to the build bed easily? A: Please do 3 steps checking! - Temperature Please check the temperature(bed and nozzle) settings before printing and set it suitable. - Building Bed Please check if the bed is level, make sure the nozzle doesn't too far or too close to the bed. - Speed Please check if the printing speed of the first layer is too fast(Recommended: 20-40mm/s). ● ● Recommended Settings: - Nozzle 210°C - 235°C (410°F - 455°F) - Bed 70°C - 80°C (158°F - 176°F) - Printing Speed: 40-80(mm/s) - These settings are for 0.4mm nozzle, it may be different with different diameters nozzle ● ● Notes - Please insert the filament into the side holes after use to avoid tangles. - Please stored the 3D printer filament in a sealed bag or box after using it. - Feel free to message us if you have any questions about the filament.