Teke Happymodel Moblite7 75mm 1S Whoop FPV Racing Drone BNF With Diamond F4 Flight Controller 5A BB2 ESC EX 0802 19000KV Motor

Specifications: Brand: Happymodel Item Name: Moblite7 1S 75mm ultra light brushless whoop Wheelbase: 75mm Size: 97mm*97mm*25mm Weight: 19.5g (without battery) Weight: 36g(with Original 1s 650mah Lipo battery) Motor: Mode: EX0802 19000KV Configu-ration:9N12P Stator Diamter: 8mm Stator Length: 2mm Shaft Diameter:Φ1mm Motor Dimension(Dia.*Len):Φ10.5mm*14.9mm Weight(g): 1.7g No.of Cells(Lipo):1S only Flight controller: (SPI RX version 1) DiamondF4 FS FC Firmware target: CrazybeeF4FS (SPI RX version 2) DiamondF4 FR FC Firmware target: CrazybeeF4FR MCU: STM32F411CEU6 (100MHZ, 512K FLASH) Sensor: MPU-6000(SPI connection) Original whoop size compatible Power supply: 1S battery input (DC 2.9V-4.35V) Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready Built-in Betaflight OSD(SPI Control) Built-in 5.8G VTX Built-in SPI receiver Built-in 5V 1A BEC Onboard 4in1 ESC: MCU upgraded to EFM8BB21 Power supply: 1S LiPo/LiPo HV Current: 5A continuous peak 6A (3 seconds) Support BLHeliSuite programmable Factory firmware: O_H_50_REV16_8.HEX Default protocol: DSHOT600 Onboard SPI D8 receiver Version 2: SPI BUS receiver Frsky D8 compatible Compatible Non EU transmitter D8 model Channels: 8ch Failsafe support No ground interference (Transmitter and receiver 1 m from the ground): 200m~300m Onboard SPI receiver Version 1: SPI BUS receiver Protocol: AFHDS and AFHDS-2A Switchable Channels: 8ch(AFHDS) or 14ch(AFHDS-2A) No ground interference (Transmitter and receiver 1 m from the ground): 200~300m Failsafe support Onboard 5.8g VTX: Output power: 25mw~200mw switchable Frequency: 40CH Input voltage: 3.3V 5.5V Current consumption: 300mA(type) Frequency: 5.8GHz 5bands 40 channels(include Race band) Smartaudio ready Runcam Nano4 Lite: Model: RunCam Nano4 Lite Image Sensor: 1/3" CMOS Horizontal Resolution: 800TVL Lens: 2.1mm(M8) FOV 160° Signal System: PAL/NTSC Non Switchable S/N Ratio: >50dB Electronic Shutter Speed: Auto Auto Gain Control (AGC): Auto Min. Illumination: 0.01Lux@1.2F D-WDR: Auto Day/Night: Color Power: DC 3-5.5V Current: 170mA@5V 180mA@3.3V Housing Material: ABS Net Weight: 1.0g Dimensions: L14mm*W12mm*H9mm Lipo Battery: Capacity:650mAh Voltage:3.8v Continuous Discharge Rate: 30C Instantaneous discharge rate: 60C Size: 60mmx18mmx8mm Weight: 16g Connector: PH2.0 Package Included: 1* 75mm Frame 1* DiamondF4 FR built-in SPI receiver  4* EX0802 KV19000 Unibell brushless motor 1* HQPROP 40MMX2 propeller(4cw+4ccw) 1* Runcam Nano4 Lite 1* Built-in 5.8G 40ch 25mw-200mw VTX 2* 1s 650mah Lipo battery 1* Propeller disassemble tool 1* Screwdriver 1* Happymodel Carry case Notes: 1. Please allow 0-1 inch error due to manual measurement. Thanks for your understanding. 2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from real object.

1. The lightest 1s 75mm brushless whoop, powerful and efficiency.2. VTX power switchable 25mw~200mw.3. The lightest 1s AIO 5IN1 F4 flight controller. Low profile canopy design.4. The new EX0802 motor adopts an integrated outer rotor design, which is compact in structure and more durable.5. The newly designed highly integrated Diamond F4 flight controller, integrated OSD, Dshoot ESC, 2.4G SPI receiver (support external reception), galvanometer, 5.8G VTX (25-200mw switchable), etc.