The Best All Stage Monitors 2025

1. Nady Indoor Stand Mountable Speaker, 100 W RMS

Designed to reduce stage clutter and volume by putting the sound where you can most use it. Compact, rugged, and lightweight-the PM Series can be mounted on a mic stand (with optional mic stand mount adapter if needed), set on a keyboard, amp, or table for effective up-close monitoring, or used as a stage monitor with four different angled positions for optimum placement and versatility.

The compact, rugged, lightweight Nady PSM-100 small monitor can be mounted on a mic stand on its built-in mounting socket or set on a keyboard for an up-close monitor Dual ferro-fluid 5" drivers deliver tight, clean volume and handle 200W Superior gain-before-feedback up to 125dB maximum SPL, and 140-15kHz frequency response with controlled bandwidth for optimum intelligibility The speaker's volume control knob lets you tweak it without going to the board and dual 1/4" I/O jacks allow

2. Seismic Audio SA-12M Single 2-way Indoor Floor Standing Speaker, 150 W RMS, Black

It's important that you can hear your music on stage. This wedge shaped, 12 inch monitor delivers every sound clearly with a 12 inch speaker, 4" x 10" piezo horn tweeter, a frequency response of 45Hz to 20,000Hz, and 150 watts RMS, 300 watts peak power. Great quality monitors are very hard to find, especially at a decent price. The Seismic Audio brand was designed to make the professional musician, as well as the musician low on cash, sound great. With your purchase, you will receive one monitor pictured and described above. So, put it in your cart today and get ready for years of trouble-free, crystal clear sound!

Model # - SA-12M - 21” tall – 15” wide – 24” deep Woofer - 12” 2 way crossover w/ a 40 oz magnet & 2” voice coil. 150 Watts RMS – 300 Peak. Wired at 8 ohms. 45Hz –20KHz Sensitivity: 97 db . Piezo Tweeter - 4x10 5/8 plywood front panel. Black carpet with black metal corners. Recessed handles

3. Seismic Audio SAX-8M 2-way Indoor Floor Standing, Pole Mount Speaker, 150 W RMS, Black

The Seismic Audio X series of Coaxial Monitors are ideal for any Pro Audio application. Whether you are doing live sound, in the studio, an emcee, a DJ gig, or karaoke...The ability to hear yourself on stage is essential. The X Series of Coaxial monitors give you a true sense of your sound! It is the perfect solution for the musician that is seeking high quality sound as well as a monitor that is easy to use and easy to set up! Its coaxial design means that all the sound flows from the same source, providing you with more uniform coverage! These monitors allow you to produce high output levels while using a smaller power amplifier and a significantly smaller footprint!

Seismic Audio SAX-8M 2-way Indoor Floor Standing, Pole Mount Speaker, 150 W RMS, Black The 2-way Floor Standing speakers provide the finest sound coverage Uproar the bass as loud as you want with 150 W RMS power without any blaring Listen to deep lows and euphoric highs with a frequency range of sound from 70 Hz-20 kHz 8 Ohm impedance extracts maximum power so you will get more output from your speakers

4. Seismic Audio SA-10M.2 2-way Indoor Floor Standing Speaker, 100 W RMS, Black

It's important that you can hear your music on stage. These 10 inch monitors deliver every sound clearly with a Pro Audio 10 inch speaker, 4" x 8" piezo horn tweeter, a frequency response of 40Hz to 20,000Hz, and 100 watts RMS, 200 watts peak power. Great quality monitors are very hard to find, especially at a decent price. The Seismic Audio brand was designed to make the professional musician, as well as the musician low on cash, sound great. With your purchase, you will receive a pair of monitors pictured and described above. So, put it in your cart today and get ready for years of trouble-free, crystal clear sound!

Seismic Audio SA-10M.2 2-way Indoor Floor Standing Speaker, 100 W RMS, Black The 2-way Floor Standing speakers provide the finest sound coverage Handles up to 100 W of RMS power Hear every detail crisp and clear with a frequency response of 40 Hz-20 kHz 8 Ohm impedance extracts maximum power so you will get more output from your speakers

5. FL-12MP-PW - Premium Powered 2-Way 12" PA Floor Monitor With Titanium Horn

Seismic Audio Fault Line FL-12MP-PW Speaker System - 300 W RMS - Black

Seismic Audio Fault Line FL-12MP-PW Speaker System, 300 W RMS, Black Listen to your favorite music and enjoy great sound with Seismic Audio FL-12MP-PW Speaker System Features an active subwoofer for booming & powerful tones

6. FL-15MP-PW - Premium Powered 2-Way 15" PA Floor Monitor with Titanium Horn

Seismic Audio FL-15MP-PW Speaker System - 400 W RMS - Black

Seismic Audio FL-15MP-PW Speaker System, 400 W RMS, Black FL-15MP-PW Multimedia Speaker System offers 400 W of RMS power and crystal clear audio Features an active subwoofer for booming & powerful tones

7. Seismic Audio SA-15M Single 2-way Indoor Floor Standing Speaker, 250 W RMS, Black

Enjoy rich, dynamic sound with the New SA-15MSingle 15" Seismic Audio Floor Monitor Speaker. Use it for outdoor events, concerts, school plays and more. This PA monitor speaker provides up to 500 watts of power for a deep and powerful audio experience. It is made with black metal corners and has a full-metal grill for protection. It's covered in durable carpet and has recessed handles for carrying.

Seismic Audio New 15" Floor Monitor Stage/Studio ~ PA/DJ Speaker BAND - SA-15MSingle: Model # - SA-15M Woofer - 15" 2-way crossover with a 50-oz magnet 2.5" Kapton voice coil 250 watts RMS - 500 watts peak Wired at 8 ohms 40Hz - 20KHz Sensitivity: 97 db Piezo Tweeter - 4x10 5/8" plywood front panel Black carpet with black metal corners Recessed handles Stage monitor speaker has full-metal grill Input terminal with two 1/4" inputs Dual ports 23'' tall x 18'' wide x 17'' deep Weight: 38 lbs per cabinet These monitors are brand new One year warranty

8. Yamaha MSP3 2-way Speaker

The MSP3 Powered Monitor Speaker is a 2-way powered monitor speaker system that delivers quality audio and excellent cost performance. To facilitate connection with a variety of audio sources, each monitor is equipped with a balanced XLR input, for direct compatibility with professional equipment, a balanced phone jack input and an unbalanced RCA jack input. The MSP3 also features separate volume controls for the LINE 1 (RCA jack) input and LINE 2 (XLR/phone) input plus HIGH and LOW tone controls for sound tailoring.

Yamaha MSP3 2-way Speaker Listen to deep lows and euphoric highs with a frequency range of sound from 65 Hz-22 kHz 10 Kilo Ohm impedance extracts maximum power so you will get more output from your speakers

9. Seismic Audio SA-12M 2-way Indoor Floor Standing Speaker, 150 W RMS, Black

It's important that you can hear your music on stage. These wedge shaped, 12 inch monitors deliver every sound clearly with a 12 inch speaker, 4" x 10" piezo horn tweeter, a frequency response of 45Hz to 20,000Hz, and 150 watts RMS, 300 watts peak power. Great quality monitors are very hard to find, especially at a decent price. The Seismic Audio brand was designed to make the professional musician, as well as the musician low on cash, sound great. With your purchase, you will receive a pair of monitors pictured and described above. So, put it in your cart today and get ready for years of trouble-free, crystal clear sound!

Seismic Audio SA-12M 2-way Indoor Floor Standing Speaker, 150 W RMS, Black The 2-way Indoor speakers with the 300 W power handling work terrifically Uproar the bass as loud as you want with 150 W RMS power without any blaring Hear every detail crisp and clear with a frequency response of 45 Hz-20 kHz 8 Ohm impedance extracts maximum power so you will get more output from your speakers

10. Seismic Audio Pro Audio SA-12MX 2-way Indoor Floor Standing, Pole Mount Speaker, 250 W RMS, Black

It's important that you can hear your music on stage. These 12 inch monitors deliver every sound clearly with a Pro Audio 12 inch speaker, 7" x 9" titanium horn tweeter, a frequency response of 45Hz to 20,000Hz, and 250 watts RMS, 500 watts peak power. Great quality monitors are very hard to find, especially at a decent price. The Seismic Audio brand was designed to make the professional musician, as well as the musician low on cash, sound great. With your purchase, you will receive a pair of monitors pictured and described above. So, put it in your cart today and get ready for years of trouble-free, crystal clear sound!

Seismic Audio Pro Audio SA-12MX 2-way Indoor Floor Standing, Pole Mount Speaker, 250 W RMS, Black The 2-way Indoor speakers with the 500 W power handling work terrifically Knock yourself out with 250 W RMS power Listen to deep lows and euphoric highs with a frequency range of sound from 45 Hz-20 kHz 8 Ohm impedance extracts maximum power so you will get more output from your speakers