The Best Performance Engine & Fuel Management Systems 2025

1. Auto Meter 1295 American Muscle 5 0 - 8000 RPM / 120 mph Tachometer/Speedometer Combo Gauge

American Muscle Tach/Speedometer Combo; 5 in.; Silver Dial Face; Fluorescent Red Pointer; White LED Lighting; Electric Air-Core; 8K RPM/120 MPH

Modern white LED through-the-dial lighting provides clear visibility during nighttime use Gauge kit includes mounting hardware, and installation instructions Speedometer is compatible with most two wire sine wave and three wire hall effect vehicle speed sensors. Speedometer can be easily calibrated using the trip reset button on the from of the unit and a premeasured two mile distance. No dip switches! Tachometer is compatible with 0.5 - 6 pulse ignition signals (1-12 cylinder engines) with points, electronic, and most 12V high-performance racing ignitions.

2. AutoMeter Gauge Tach/Speedo 3-3/8in. 120MPH 8K RPM Elec. Program. Arctic White - 1381

Domed Lens. Quality Construction. Nostalgic Look. 1 Year Limited Warranty. Traditional Incandescent Lighting Illuminates Perimeter Of Dial. Incl. Bulb; Socket Assembly; Red/Green Bulb Covers. Incl. Mounting Hardware/Installation Instructions. Compatible w/Most 2-Wire Sine Wave And 3-Wire Hall Effect. Compatible w/.5-6 Pulse Ignition Signals. Reprogram At Any Time To Accommodate Changes.

Traditional incandescent lighting illuminates around the perimeter of the dial Gauge kit includes bulb and socket assembly, red and green bulb covers, mounting hardware, and installation instructions Speedometer is compatible with most two wire sine wave and three wire hall effect vehicle speed sensors. Speedometer can be easily calibrated using the trip reset button on the from of the unit and a premeasured two mile distance. No dip switches! Tachometer is compatible with 0.5 - 6 pulse ignition signals (1-12 cylinder engines) with points, electronic, and most 12V high-performance racing ignitions. Reprogram at any time to accommodate changes in gear ratio or wheel and tire combination with a simple push button, 2 mile drive calibration.

3. Auto Meter 1481 Designer Black Dual Gauge

Electronic Multi Purpose Gauge Designer Black Tach/Speedo Combo Designer Black Tach/Speedo Combo; 3-3/8 in.; Black Dial Face; Fluorescent Red Pointer; White Incandescent Lighting; Electric Air-Core; 8K RPM/120 MPH; SPECIFICATIONS: Face Color: Black Gauge Size: 8.500 in. W x 5.250 in. H x 1.375 in. D WARNING CA Proposition 65: Yes WARNING CA Proposition 65 Message: WARNING: This product can expose you to chemicals; which are known to the State of California to cause cancer. For more information; visit www.p65warnings.ca.gov. FEATURES: Domed Lens Quality Construction Black Chrome Bezel 1 Year Limited Warranty Traditional Incandescent Lighting Illuminates Perimeter Of Dial Incl. Bulb And Socket Assembly; Red/Green Bulb Covers Incl. Mounting Hardware/Installation Instructions Compatible w/Most 2-Wire Sine Wave And 3-Wire Hall Effect Compatible w/.5-6 Pulse Ignition Signals Reprogram At Any Time To Accommodate Changes Save space on your dash and provide a clean look with AutoMeter's Electronic Tach/Speedo Combo. Taking the highly precise circuits from the individual speedometer and tach and combining them into one unit gives you the accuracy and the response time you need and the convenience of a one piece solution. Compatible with nearly any factory speed sender and 1-12 cylinder applications, this unit is simple to calibrate and designed with the type of durability you expect in an AutoMeter gauge. AutoMeter's GPS Speed Sender is also compatible for an easy, plug and play solution. Next generation instruments from Auto Meter combine our NASCAR proven racing movements with our award winning LED lighting technology to offer you the ultimate in Accuracy, Durability, Visibility and Styling.

Traditional incandescent lighting illuminates around the perimeter of the dial Gauge kit includes bulb and socket assembly, red and green bulb covers, mounting hardware, and installation instructions Speedometer is compatible with most two wire sine wave and three wire hall effect vehicle speed sensors. Speedometer can be easily calibrated using the trip reset button on the from of the unit and a premeasured two mile distance. No dip switches! Tachometer is compatible with 0.5 - 6 pulse ignition signals (1-12 cylinder engines) with points, electronic, and most 12V high-performance racing ignitions. Reprogram at any time to accommodate changes in gear ratio or wheel and tire combination with a simple push button, 2 mile drive calibration.

4. AutoMeter Gauge Quad 5in. 0 Ohm(e) to 90 Ohm(f)Elec Old Tyme White

Sometimes Space Is Limited. The Autometer Quad Gauge Provides A Solution To Limited Dashboard Space While Providing A Clean Look. Individual Autometer Air Core Meter Movements For Each Function Provide The Accuracy And Durability Required By Even The Most Demanding Applications. Includes A Single Wire 1/8" Npt Temperature Sender And A 1/8" Npt Oil Pressure Sender. The Voltmeter Reads From 8-18V On Negative Ground Electrical Systems And Fuel Level Resistance Range Is 0 Ohms Empty To 90 Ohms Full (Compatible With Amid 60S Through Mid 90S Gm Fuel Level Senders). Installation Instructions

AutoMeter 1619 NEW

5. AutoMeter Gauge Dual Fuel & Oilp 3-3/8in. 0 Ohm(e) to 90 Ohm(f)& 100PSI Elec Old Tyme White

Allowing For Flexibility In Your Dash Configuration And A Clean Look That Saves Space, Autometers Dual Function Electronic Fuel Level And Oil Pressure Gauge Is A Great Solution For Unique Dash Layouts. Combining Individual Air Core Meter Movements Into One Compact Housing, You Get The Same Durability And Accuracy Youve Come To Expect From Autometers Standalone Instrumentation. The Fuel Level Gauge Is Designed To Be Compatible With 0 Ohm Empty, 90 Ohm Full Fuel Level Senders (Most Mid 60S Through Mid 90S Gm Vehicles) And An 1/8" Npt Oil Pressure Sending Unit Is Included. Installation Instructions

AutoMeter 1624 NEW

6. Auto Meter Quad Gauge (Antique Beige) - 1814

Sometimes Space Is Limited. The Autometer Quad Gauge Provides A Solution To Limited Dashboard Space While Providing A Clean Look. Individual Autometer Air Core Meter Movements For Each Function Provide The Accuracy And Durability Required By Even The Most Demanding Applications. Includes A Single Wire 1/8" Npt Temperature Sender And A 1/8" Npt Oil Pressure Sender. The Voltmeter Reads From 8-18V On Negative Ground Electrical Systems And Fuel Level Resistance Range Is 0 Ohms Empty To 90 Ohms Full (Compatible With Amid 60S Through Mid 90S Gm Fuel Level Senders). Installation Instructions

Traditional incandescent lighting illuminates around the perimeter of the dial 4 in 1 gauge design saves valuable real estate on your dash while allowing you to monitor critical parameters 12 and 16 volt compatible, well-suited with nearly every street car or race car electrical system Auto Meter's race proven air-core electric instruments provide quick and accurate readings while keeping hazardous fluids outside of the vehicle

7. AutoMeter 1819 Antique Beige Quad Gauge

Sometimes Space Is Limited. The Autometer Quad Gauge Provides A Solution To Limited Dashboard Space While Providing A Clean Look. Individual Autometer Air Core Meter Movements For Each Function Provide The Accuracy And Durability Required By Even The Most Demanding Applications. Includes A Single Wire 1/8" Npt Temperature Sender And A 1/8" Npt Oil Pressure Sender. The Voltmeter Reads From 8-18V On Negative Ground Electrical Systems And Fuel Level Resistance Range Is 0 Ohms Empty To 90 Ohms Full (Compatible With Amid 60S Through Mid 90S Gm Fuel Level Senders). Installation Instructions

AutoMeter 1819 NEW

8. Holley EFI 550-1310 Terminator X Max Ford Coyote - 2011-2012 w/ Ti-VCT

Compatible with 2011-2012 Ford Coyote Engines with Ti-VCT, EV1 injectors and a 98+ 98+ 4R70W Transmission; Terminator X and X Max Coyote systems supports Ford Coyote platform with Ti-VCT. Terminator X features real-time fuel learn, high impedance injector drivers, integrated 1bar MAP sensor, and 4 programmable inputs and outputs. These are ideal for electric fans, boost control solenoids, progressive NOS control, and much more. Terminator X ECU comes fully loaded with base maps for common Coyote engine combinations to get you out of the garage and on the road/track fast. The included 3.5 in. LCD touch screen handheld contains an easy to use calibration wizard as well as tuning and gauge display functions. Included with Terminator X is Holley EFI's industry leading support, easy to use software suite that allows full laptop access/compatibility for advance users. Whether you're building a budget beater or full on race car, Terminator X has the industry leading features and technology you need at a price that won't break the bank.;

Plug and play engine control (for Ford 5.0L Coyote with Ti-VCT (Twin Independent Variable Camshaft timing) Plug and Play compatible with Holley EFI accessories â€" Analog gauges, shift lights, modules, and both 6.86†and 12.3†Pro Dash EV1 or EV6 injector harness included (depending on your injector configuration) High Impedance Injector drivers power Holley EFI and most stock injectors -Injector support chart found in instructions (will not support low impedance injectors) Included Bosch LSU 4.9 wideband O2 sensors for accurate readings and precise tuning control Built in 1bar MAP (manifold absolute pressure) sensor included - For Boosted applications â€" internal MAP sensor can be disabled and utilize external MAP sensor harness (kit includes a terminated connector for seamless installation) Vacuum hose adapters included - (1/8â€, Â1/4â€, and 3/16†sizes) 4 inputs â€" 12v, Ground, 5v, and frequency for items like pressure sensors, activation triggers, nitrous activation, or trans brake Boost Control â€" boost vs. time, boost vs. gear, boost vs. RPM, boost vs. speed, and boost safeties Nitrous Control â€" channels for wet or dry, progressive or non-progressive, rich/lean safeties, and target closed loop AFR (Air/Fuel Ratio) Advanced Tables â€" ( 4x 1D tables, 1x 1D gear table, 4x 2D table, and 1x 2D gear tables) for nearly unlimited table configuration options On-board diagnostic LEDS - ECU power, engine run, TPS calibration, cam signal, and more! Identify critical engine parameters at a glance 3.5†touchscreen handheld included - Internal data-logging, custom gauge display, and calibration wizard allow quick building bases tunes for any Domestic V8 engine Compact ECU (Engine Control Unit) â€" At only 7.45†x 4.1†x 1.66†the compact packaging allows mounting virtually anywhere (XMAX ECU = 9.6†x 4.1†x 1.66â€). REMINDER: diagnostic LED’s must face up! FREE EFI Tuning software â€" For compete control of your Terminator X power plant

9. NavAtlas X3KIT - CANAM X3 2 Din inatallation Kit

The X3KIT is the perfect installation kit for the DXU1100DVR when mounting it into a CANAM X3.

UV Resistant ABS plastic Retains Factory Look

10. Innovate SCG-1 Solenoid Turbo Boost Controller & Wideband O2 Gauge All-in-1 Kit

When you have a turbocharged or supercharged car, you don't just want a generic boost controller, you want a boost controller that does exactly what you want. The Innovate Motorsports SCG-1 Solenoid Boost Controller and Wideband O2 Gauge All-In-1 Kit prides itself in its programmable configuration options, great for flexibility in your system.This all-in-1 kit includes a SCG-1 gauge, wideband oxygen O2 sensor, 8-foot sensor cable, O2 sensor weld-on bung, 4 BAR map sensor, solenoid with bracket, vacuum hose kit, black/silver bezel, black/white faceplate, serial program cable, and installation manual to keep everything straight.Customize the controller display within the 2.0625-inch diameter gauge body by changing the color of the faceplate and bezels. The controller's software allows you to adjust the boost in your vehicle and set safety cuts to the boost for when your engine runs too rich or lean.Get just what you need to start tuning your vehicle with the SCG-1 Solenoid Boost Controller Kit.

Program boost cut safety using air/fuel and pressure references Set programmable solenoid duty cycle with separate gain control functions Faceplate, bezels, and OLED display are configurable: chose between white and black faceplates, silver and black bezels, and information format on the display Controller and display housed in 2.0625-inch diameter gauge body Includes: SCG-1 gauge, wideband oxygen O2 sensor, 8-foot sensor cable, O2 sensor weld-on bung, 4 BAR map sensor, solenoid with bracket, vacuum hose kit, black/silver bezel, black/white faceplate, serial program cable, and installation manual 4 BAR map senor with a pressure range from -29 inHG to 43.5 PSI (-1 to 3 BAR) Features a peak hold function, high resolution solenoid, MTS serial in/out, and 4 channels of log-able data with LogWorks PC Software Wideband O2 Compatible with leaded, unleaded, diesel, and E85 fuels Can calibrate the O2 sensor for maximum accuracy Color: Black Manufacturer warranty: 1-year warranty Configure linear 0-5V analog output for wideband O2 for use with piggy back or stand alone ECU's as well as with external data loggers