Access Limited 87-04 Dodge Dakota 6ft 6in Bed Roll-Up Cover

Cover material is quality and installs easily. Bought same model cover in 2001 for F250 HD truck and after all those years it looks and works great. Installed this new cover on 2016 Silverado truck and it looks great and should give the same service.

I had an Access cover on my 2004 Ford Ranger for 10+ years and it held up great. So I naturally came back to Access for my new truck, a 2015 GMC Canyon. The cover fits great, and is nice quality. However, there are some issues with the design of the Canyon bed that makes the installation of the front weather seal and the tailgate seal a little tricky. This is not the fault of the cover, I imagine you would have the same issue with any cover unless you do some customization. On the front weather seal, because the top edge of the box has a large radius, make sure you slide the rails as far forward as they will go (which you are supposed to do anyhow). However, there is still 1/4 inch or more space between the flat top surface of the box where you would normally want to stick the seal. You need to put the seal on the corner radius, not on top, in order to get a decent seal to the tonneau rails. Also, I think the plastic caps on tops of the bed sides need to be caulked because there looks to be a huge gap that is not sealed at that point (again not the fault of the cover). The back tailgate seal took a bit of fiddling to get something to seal, due to the shape of the bed and tailgate. I had to install the seal in 5 separate pieces (one piece under the lip of the bed, one piece on each of the vertical bed sides, which is normal, but then I had to add two custom cut pieces to conform to the radius of the box and tailgate at each of the corners). Not perfect, but came out pretty good, and only weak spot (I think) will be at the very top on each side, just was no perfect way to seal that. I should take a picture of this, not easy to explain : ) Overall, it fits well, good quality, and I'm glad I installed it, but inspect the shape of your tailgate/box first if you don't want to do some fiddling with the seals.

Just Purchased a new 2014 Toyota Tacoma and wanted a cover that looked really good and had great quality appearance. Boy did I pick the right one! Installing the cover was quite simple . Instructions were easy to follow. I could've spent more money on another one, but the quality of this cover is great. If you want a sharp cover this is the one to buy.

This cover was relatively easy to install on my 2012 Dodge Ram 1500 truck and it looks great. For this truck, the existing rails with tiedowns had to come off and then be reinstalled with the rails for the cover sandwiched between them and the side of the bed, so I was grateful that I had an extra set of hands to install it. It fits very well and I can still open the Ramboxes fully to access them. I have seen a slight increase in gas mileage since I installed the cover. It is very secure when closed and can't be opened if the tailgate is locked. It rolls up and fastens at the front of the bed if you need it out of the way to haul larger cargo. Had one problem at installation because the bag for the hardware came with the top cut open and some of the washers had migrated inside the cover and were not found until we opened the cover fully as the last step of the installation. They were common washers and we had some on hand that we used, but it could have been a problem if it had been the spacers or bolts. Overall, this cover is very easy to use, looks great, and keeps stuff in my truck bed dry and safe. I highly recommend it.

The Access Limited Truck Bed Cover is a great product in my opinion, this is the second new truck I have purchased and installed this same basic cover on. Some good improvements for locking the cover on this current model; helps keep the bed more secure. The cover itself is the same high quality as my first cover and its just as easy to install and keep tight so its not noisy driving down the highway. Its also very easy to access the bed when you need to load something and the way it rolls up and clips up next to the cab is simple and works great. The sealing kit that comes with this cover also does a great job of keeping the bed dry.