JBL - BASSPRO 8" Single-Voice-Coil Loaded Subwoofer Enclosure with Integrated Amp - Black

JBL BassPro SL 2 Compact powered subwoofer: 125 watts and an 8" sub The built-in Class D amplifier delivers 125 watts RMS to the sub, and you can use the low-pass filter, bass boost, and phase switch to get the best possible performance in your vehicle. The amp hardly gets warm when it's working, so you don't have to worry about installing the Bass Pro SL 2 under your seat or in some other tight space. The Bass Pro SL 2 includes line- and speaker-level inputs with an input load switch. With cars getting smaller every year, JBL understands that the need for compact powered subs is greater than ever. Their latest BassPro SL 2 powered sub delivers impressive bass from a stealthy low-profile enclosure that'll fit under the seat in many vehicles. Its 8" shallow-profile woofer was designed especially for this compact enclosure, so you know you'll be hearing some strong bass. Product highlights: Enclosure Type Sealed Finish Material ABS Grille Metal mesh Connector Type RCA, speaker-level Bi-amp Inputs No Woofer Size (inches) 8 Woofer Material Poly Passive Radiator None Width 13-1/2" Height 2-7/8" Depth 10-1/8"Powered subwoofer with heavy-duty ABS plastic enclosure 8" shallow-profile woofer Class D amplifier (125 watts RMS) 10-gauge amp wiring kit required (sold separately) Controls: Low-pass crossover variable from 50-120 Hz at 12 dB per octave Variable bass boost (0 to +9 dB at 70 Hz) Phase switch (selectable 0 or 180 degrees) Speaker and line-level inputs Frequency response: 35-120 Hz Dimensions: 13-9/16"W x 2-7/8"H x 10-1/16"D Warranty: 1 year Our 30-day money-back guarantee MFR # SUBBPSL2AM Enclosure & Driver: The JBL BassPro SL2 features a single 8" woofer in a compact sealed enclosure. The woofer driver features a polypropylene cone with a butyl rubber surround, mounted in a durable ABS enclosure that's compact enough for mounting under seats and in tight spaces. Amplifier: The subwoofer enclosure is powered by a built-in 125 watt RMS Class-D amplifier. Class-D operation means the amp runs cooler and draws less current from the vehicle's electrical system. High/Low Inputs: The BassPro SL2 includes a pair of RCA low-level signal inputs, accepting signals from 0.05V - 2.0V. If connecting to a factory headunit or radio without pre-amp outputs, a 2-channel speaker-level input harness is included, accepting signals from 0.5V - 20V. Audio Sense: The Audio Sense switch, when set to On, allows the BassPro SL2 to power on when it senses voltage on the speaker-level inputs, eliminating the need for connecting a remote turn-on wire. Crossover: The amplifier's low pass crossover point is continuously variable from 50 to 120 Hz; the crossover slope is 12 dB/octave. Bass Boost: The bass boost circuit provides a variable (0-9 dB) signal boost centered at 70Hz. Remote Level Control: A remote level control is provided, that can be mounted under a dash or console for easy adjustment of the bass level from the driver's location. The remote level control includes a 16.5' remote cable terminated in RJ-25 connectors on both ends.