Specifications - Item Size - 34.25inches x 15inches - Item Weight - 1.78pounds - Clamps - Heavy Duty Clamps - Material - 0.7mm Thickened Aluminum - Applicable Heater Type - Full-Size Round Patio Heaters Function - Highly Reflective Surface - Foldable, Easy to Storage - High-temperature Resistance - Easy to Install, No tools needed - Save Energy, Use less Propane, Environmental Friendly - Directional Heat Conduction, Extended Heat Range and Increased Performance Warm Tips 1. The reflector must be assembled on the opposite side of the control knob, otherwise it will cause the knob to melt. 2. Please remove the blue protective film of 3 Reflector Panels before assembly. 3. Pay attention to the corners or edges of panels while installing to avoid scratches. 4. Check the Screws to make sure they are still tightly fastened to the heater top. Installation Steps STEP 1 - Connect the left panel (A), middle panel (C), and right panel (B) withM6 screws (G) and M6 Cap nuts (H) STEP 2 - Connect the Bracket (D) to the panels with M6 screws (I) STEP 3 - Connect the deflector to the heater reflector with Fix screws (E), and put the protective cover on the fix screws. Then fix the deflector on the heater.

𝗘𝗻𝗲𝗿𝗴𝘆 𝗦𝗮𝘃𝗶𝗻𝗴 𝗮𝗻𝗱 𝗔𝗱𝗷𝘂𝘀𝘁𝗮𝗯𝗹𝗲 𝗥𝗮𝗻𝗴𝗲 - This patio heater reflector shield is the perfect accessory for the heater. With adjustable range function, it effectively expands the heating range and blocks heat from walls, trees, or anywhere that doesn't need it. Make your propane last longer. 𝗧𝗵𝗶𝗰𝗸𝗲𝗻𝗲𝗱 𝗔𝗹𝘂𝗺𝗶𝘂𝗺 𝗠𝗮𝘁𝗲𝗿𝗶𝗮𝗹 - Most reflector shield on the markets utilize 0.6mm aluminum. EAST OAK's outdoor heater reflector shield is made of 0.7mm thickened premium aluminum material, making it resistant to breaking, anti-rust, and bringing long-term durability. In addtition, the heat-focusing reflector is hammered with powder coating thermal focusing to provide better heat distribution. 𝗘𝗮𝘀𝘆 𝘁𝗼 𝗜𝗻𝘀𝘁𝗮𝗹𝗹 - Please be careful with the edge during installation to avoid scratches. STEP 1: Connect the left panel (A), middle panel (C), and right panel (B) withM6 screws (G) and M6 Cap nuts (H). STEP 2: Connect the Bracket (D) to the panels with M6 screws (I). STEP 3: Connect the deflector to the heater reflector with Fix screws (E), and put the protective cover on the fix screws. Then fix the deflector on the heater. 𝗖𝗼𝗺𝗽𝗮𝘁𝗶𝗯𝗹𝗲 𝗣𝗮𝘁𝗶𝗼 𝗛𝗲𝗮𝘁𝗲𝗿𝘀 - Suitable for umbrella-shape patio heaters such as the EAST OAK EO-PH001. Not suitable for pyramid patio heaters and mini patio heaters. 𝗘𝗮𝘀𝘆 𝘁𝗼 𝗖𝗮𝗿𝗿𝘆 𝗮𝗻𝗱 𝗦𝘁𝗼𝗿𝗲 - Made of three panels, this patio heater focusing reflector is easy to carry and store. 𝗛𝗘𝗔𝗧 𝗡𝗢𝗧𝗜𝗖𝗘 - THE REFLECTOR MUST BE ASSEMBLED ON THE OPPOSITE SIDE OF THE CONTROL KNOB, OTHERWISE IT WILL CAUSE THE KNOB TO MELT. 𝟯-𝗬𝗲𝗮𝗿 𝗖𝘂𝘀𝘁𝗼𝗺𝗲𝗿 𝗦𝘂𝗽𝗽𝗼𝗿𝘁 - Please check the manual for customer service email to contact us if you have any questions or problems. We provide a 3-year Warranty against manufacture defects and lifetime customer support.