NeuLog pH Logger Sensor

This sensor can be used to measure the static pH values of common liquids (water, milk, soft drinks, vinegar, etc.) as well as the changing values in titrations or experiments such as those looking at the effect of antacids. The pH sensor is designed for long life in a variety of general purpose situations. Its sealed reference system and gel fill make it easy to use and maintain. With an epoxy body it is a durable electrode for use both in the laboratory and in the field. Sensor Calibration: This sensor gives a fast response across the full pH range and can be calibrated with any standard buffer solution. The sensor should be connected to a voltage source (the USB module plugged into a PC, Neulog's ?? Display Unit or Battery Unit). Insert the sensor into a pH = 7 buffer and press the sensor's push button for about 3 seconds. The reading is calibrated to 7. *Requires connection hardware, sold separately. Experiment Duration: 1 second to 31 days. Operation Modes: Range | ADC Resolution | Resolution | Max Sample Rate (S/sec): 0 to 14, 16 bit, 0.01pH, 100 Video:

Logger sensor for measuring static pH values in common liquids Can be used to monitor ecological systems, effect of pH on enzymes, and chemical reactions with changing pH, such as titrations, for further study pH electrode probe with glass bulb for taking readings Required accessories. To use sensors you will need either: a USB Module (USB 200) to connect via USB cable to PC or Mac, or a Wi-Fi Module (WIFI201) and battery (BAT200) to connect to any Wi-Fi enabled device (Smart Phone, Tablet, Computer) Experiment duration of 1.0 second to 31.0 days for versatile use, with 15.0-bit analog-to-digital converter (ADC) resolution for reading range of values